WAN Settings
TAINY iQ
Page 69 of 147
6.7 Configure IPsec for Dynamic Multipoint VPN
Click on the
WAN
tab and select “
DM VPN
” to open the screen.
IPsec
The DM VPN has no encryption and authentication mechanism by its
own. However, it is possible to add these features using IPsec technology.
Select
“
Yes”
if the communication shall be protected by IPsec and click
the “
Settings
” button to define the IPsec.
If the IPsec function is activated, each dynamically established GRE
tunnel will be protected by a corresponding IPsec tunnel, which is also
dynamically established.
ISAKMP-SA Settings
The ISAKMP-SA settings define the procedures and packet formats to
establish, negotiate, modify and delete the Security Associations (SA) for
the IPsec tunnel(s).
IPsec-SA Settings
The IPsec-SA settings define the timeouts, encryption methods, packet
formats etc. of the Security Association (SA) of the IPsec tunnel(s).
It also enables/disables the dead peer detection (DPD) and its behaviour.
The settings that shall be applied for ISAKMP-SA and IPsec-SA settings
have to be agreed with the administrator of the remote station as well as
the DM VPN. The settings shall be the same for all possible
communication partners of the TAINY IQ-LTE in this DM VPN.
Summary of Contents for TAINY IQ-LTE
Page 1: ...TAINY IQ LTE User Manual ...
