CONTACT US AT
w w w .D Rpow e r .com
21
Beam Operating Positions
Placing the Beam in the Vertical Position
1.
Pull out on the Horizontal Beam Lock (
Figure 46
) and lift up on the Beam to
rotate it to the vertical position (
Figure 47
).
2.
To lock the beam in the vertical position, pull out on the vertical beam lock
and rotate it to secure the beam (
Figure 48
).
Placing the Beam in the Horizontal Position
1.
Pull out on the vertical beam lock and rotate it down to the unlock position
(
Figure 48
).
2.
Pivot the Beam to the horizontal position (
Figure 49
).
3.
The horizontal beam lock is self-locking. The spring loaded lock will snap
into place when the beam is lowered into position.
Take extra care when raising and lowering the beam as it is fairly heavy.
Having a second person assist with raising or lowering the beam is
recommended.
Be sure to keep hands away from any possible pinch points.
Always use the log splitter in the vertical position when splitting heavy
logs.
Figure 49
Horizontal
Position
Figure 48
Vertical
Beam
Lock
Vertical
Position
Figure 47
Figure 46
Horizontal
Beam Lock
