3
Setup and Installation
3-22
Narkomed GS Setup and Installation Manual
Draeger Medical, Inc.
Installing the
Patient Line
Boom Arm
(Optional)
1. 1.Assemble the patient line boom arm and support plate as illustrated,
with two
d
-24 x 2¾ in. flat head socket screws.
2. 2.Position the assembly at the left side of the machine, and attach the
support plate to the machine with four ¼-20 x
f
in. button head socket
screws and lock washers. If the machine was ordered with a manual
sphygmomanometer, use a ¼-20 x
d
in. button head socket screw
through the gauge mount at the lower front corner of the support plate.
3. 3.Install two ¼-20 x 1¾ in socket head cap screws through the patient
line boom arm block and support plate into the machine.
SU87030
SUPPORT PLATE
PATIENT LINE
BOOM ARM
1/4-20 X 7/8 IN. BUTTON
HEAD SOCKET SCREW
AND LOCK WASHER (4X)
3/8-24 X 2 3/4 IN.
FLAT HEAD
SOCKET SCREW (2X)
1/4 - 20 X 3/4 IN.
SOCKET HEAD
CAP SCREW (2X)
Summary of Contents for Narkomed GS
