Canadian DragonEye Speed LIDAR
®
Operator Manual
Selecting Speed Mode
The LIDAR will normally power up in “Speed”
mode, unless it was
recently used in a different mode. If “Speed”
mode is
not displayed
on power up, simply press
until the back panel displays:
km/h
M
Using the HUD Sighting System
The Head-Up display provides a precision aiming reticle, speed
reading, and other status information. To find the sighting reticle,
click the trigger to wake up the LIDAR and look directly through the
HUD letting your eyes focus on a target well in front of the LIDAR
unit. If you haven’t used a HUD device before, it might take a minute
or two for your eyes to adjust the first time.
HUD Aiming
Reticle
(Note:
Make sure the LIDAR’s brightness
setting is on
medium or high
if working in daylight.)
DragonEye Technology, LLC | Doc. 30508 Rev 05
17
