2
BEFORE USE
Step 1. Remove the filter from the packaging, making sure to also remove the blue
cover from underneath.
Step 2. Fully submerge the filter in water for 12 minutes, then rinse it 2-3 times under
running water. The water from the filter may have a black color until the filter is
completely clean. Repeat if the water from the filter is still black.
Step 3. Clean the pitcher using soap and water. Rinse thoroughly.
SET UP AND WATER FILTRATION
Step 1. Press the filter into place in the water pitcher.
Step 2. Pour water into the pitcher. Wait for all of the water to be filtered.
Step 3. Place the lid on the pitcher.
LCD TIMER DISPLAY
1. The LCD timer display on the lid of the pitcher indicates when the filter must be
replaced.
2. The filter should be replaced after 60 days or 150L of water.
3. The timer will begin flashing as a reminder to replace the filter.
4. Reset the timer after replacing the filter.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the installation, please call
a qualified technician. Check carefully to make sure there are no defective or damaged parts. Improper
installation may result in product damage. Do not use this product for any purpose that is not explicitly
specified in this manual. We cannot be liable for damage or injury caused by improper use.
WARNING!
