determining exposure. This setting is particularly useful in shots where an important region
might otherwise be over- or underexposed.
When you change this setting, the LCD display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine
the correct level of exposure.
2. Housing Mode:
OFF/ ON
Default setting is OFF.
In video mode, press and hold the shutter button for 3s to switch camera node when the
camera is in the waterproof case.
3. White Balance:
Auto, Sunny, Cloudy, Incandescent Light, Fluorescent Light
Default setting is Auto.
White Balance lets you adjust the color temperature of videos and photos to optimize for
cool or warm lighting conditions. When you change this setting, the LCD display
immediately shows you the effect on your image.
4. Angle:
170°, 140°,110°, 70°
Default setting is 170°.
5. Diving Mode: Off / On
Default setting is off.
Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes.
Diving Mode is designed to be used in tropical and blue water, optimized for use between
10 and 80 feet.
6. Image Rotation:
Off / On
Default setting is Off.
This setting determines the orientation of your video or photos to help you prevent upside
down footage.
7. Driving Mode:
Off/ On
Default setting is Off.
If you turn on driving mode and connect camera with car cigarette lighter, the camera will
turn on automatically if you start your car and will turn off if you stop your car.
8. Frequency:
Auto, 50Hz, 60Hz
Default setting is Auto.
9. LED Indicator Light:
Off / On
Default setting is On.
10. Screen Saver:
Off, 10s, 20s, 30s, Close
Default setting is 30s.
Turns off the LCD display after a period of inactivity to save battery life. To turn on the LCD
display again, press any button on the camera.
11. Power Save:
Off, 1minute, 3minutes, 5minutes
Default setting is 3minutes.
Powers off your Vision 3 after a period of inactivity to save battery life.
12. Date Stamp:
Off / On
Default setting is On.
If you turn on Date Stamp, this camera adds date stamp to the video and photos you take.
13. Language:
简体中文
,
繁體中文
, English,
日本語
, Deutsch, Français, Italiano, Español
Default setting is English.
14. Date-Time:
MM-DD-YYYY HH-MM-SS
15. Format:
Format Card? Confirm / Cancel
To keep your micro SD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
16. Reset to Factory:
Confirm Reset to Factory? Confirm / Cancel
This option resets all settings to their default values.
17. Firmware Version
Model: Vision 3 Pro
Manufacturer: DragonTouch
You can check the model, version, updated time and manufacturer of your Vision 3 Pro.
11
12
