Configuring Ethernet Ports 1 and 2
15
Horizon Compact Plus Release 1.0.1
Wireless Ethernet Product User Manual
– Volume 2
Required Action
Steps
Configure Ports
This command will allow you to configure any of the four possible ports
The first example configures Port 1 (p1) as a Gigabit port. Port p4, the second port associated
with Port 1, cannot be enabled if p1 is to operate at Gigabit speed. Ports p3 and p4 have been
previously disabled in this example. Port p2 cannot be disabled. Note that the information
shown in brackets ( ) at the end of each line shows the current configuration. Enter a new
configuration and then press Enter, or just press Enter to retain the current value.
Note 1: p1 is the only port that supports either a fibre or copper option.
Note 2: p1 is the only port that supports pause frames.
Sequence:
set enet config
and press Enter
The system responds:
#Press 'Ctrl-X' to exit config process
#Press 'Enter' to retain previous value
Port Id[P(1-4)] (1) ?
1
Port Description ():AnyName
Auto Negotiation [ on(1) | off(2)] (on):
Medium [ copper(1) | fiber(2) | auto(3)] (auto):
Speed Mbps [10 (1) | 100 (2) | 1000(3) | auto(4)] (auto):
Optical Transceiver State [on(1) | off(2)] (off):
Pause Frame Enable [on(1) | off(2)] (off):
Maximum Frame Size (1600):
Port Payload State [enable(1) | disable(2)] (disable):
1
Port Admin state [on(1) | off(2)] (on):
Apply the above settings ? Enter yes(y) or no(n)y
---------------------------------------------------------------------------------------------------------------------------
ETHERNET PORT CONFIGURATION
======================================================================
Enet Port ID :P1
Port Descriptor :AnyName
Auto Negotiation :on
Port Medium :auto
Optical Tx State :on
Pause Frame Enable :off
Speed :auto
Max. Frame Size :1600
Payload State :
enable
Admin State :on
Enet Port ID :P2
Port Descriptor :AnyName
Auto Negotiation :on
Speed :auto
Max. Frame Size :1600
Payload State :enable
Admin State :on
Enet Port ID :P3
Port Descriptor :AnyName
Auto Negotiation :on
Speed :auto
Max. Frame Size :1600
Payload State :disable
Port State :off
Admin State :on
Enet Port ID :P4
Port Descriptor :AnyName
Auto Negotiation :on
Speed :auto
Max. Frame Size :1600
Payload State :
disable
Port State :off
Admin State :on
