DRAMI
Ń
SKI Animal profi 2 user manual
31
Additional menu - managing images and cine (saving in the memory and loading onto
the screen, searching, sending to the pendrive and cancelling images and cine loops)
After freezing the user may save in the memory a single image or the entire sequence of 256
frames as well as load onto the screen already recorded images and cine loops.
Such options are available on the Additional menu list, opened with the button. The
list contains several positions: Save image / Load image / Save cine / Load cine.
Save image/cine
To save the image or cine in the memory the user must select the right option and confirm it
with OK button. The image (cine) will be automatically saved on the list under the ordinal
number, and the message about this number will be displayed shortly after completing the
saving procedure. (saving the sequence of 256 frames takes about 5 seconds).
The memory of the ultrasound scanner may store 200 images and 200 full cine loops.
Attention! if necessary, a few or more images can be saved from one cine loop.
Creating a description for an image or cine loop.
When saving, it is possible to add a description to the image. The system will display a
dialogue box with available choices. In the description field, individual digits or letters are
entered with the use of navigation buttons:
,
.
The maximum of 30 signs may be
entered). The process of describing is completed upon pressing the OK button and saving
the image or cine in the memory together with the date, time and description.
Load image/cine
To load the image or cine saved in the memory it is enough to open the Load image /Load
cine option. Next, the user should check and confirm the appropriate position from the list by
pressing OK. The list contains basic data concerning the image, such as date of saving and
a preview in the form of a miniature highlighted position).
After loading a cine loop onto a screen the user may scroll frames or frame sequences
forward and backwards with the use of navigation buttons.
