22
MAINTENANCE OF THE DEVICE AND PROBES
During use, the device may be contaminated, also with infectious agents. Directly after work, the
device should be cleaned with a damp, wet cloth or paper towel, using a mild detergent. When
cleaning, protect slots in the casing from moisture.
The surface of the device should be disinfected with a special agent for disinfecting medical
equipment.
Attention!
Ultrasonic probe must be carefully disinfected after each use
.
After cleaning with a damp cloth, the ultrasound scanner should be wipe dry with a paper towel, if
necessary.
Warning! - Do not use heavily concentrated, aggressive agents and
abrasives.
When wet cleaning, protect plugs, slots and holes in the casing
against moisture.
It is advised that the ultrasound scanner users have regular technical inspections carried out by
the producer every two years. It will help to ensure the highest level of patients' safety.
Operational and technical comments
Prepare the device and accessories before starting the work.
Turn the power on and check if low battery is signalled.
A special gel is necessary to carry out the examination (please use gels recommended for
ultrasonography, ideally after making sure that they have special certificates authorising their use).
Using other substances may be uncomfortable and ineffective and cause adverse effects. A generous
portion of gel improves signal penetration and makes it possible to achieve a proper and clearer
image. Before starting work it's good to make sure id there is enough gel for the planned
examination.
Images obtained during the penetration are influenced by a number fo factors, such as the place of
applying the head, penetration surface (i.e. the manner of applying the head), amount of gel and, of
course, experience and skills of the operator.
During the examination, a keyboard is used to set the best parameters for operation in specific
conditions. Gain control option should be used. The device 'remembers' previously used gain
settings for individual scanning depths. A focusing function should be used, which contributes to
obtaining more legible results for the examined object.
