background image

8

5.  HEALTH & SAFETY INFORMATION

5.2 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: Risk of electric shock. Do not open.

This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the 
fuse fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the 
substitute is of the correct rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is 
replaced before attempting to connect the plug to an electrical outlet. If the cover is 
missing, a replacement must be obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable shall be disabled to prevent 
connection to a live electrical outlet.
This appliance is Class I

 and is designed for connection to a power supply matching that 

detailed on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this 
appliance. Follow all the instruction supplied with the extension lead.

Earthed      : This product requires an earth connection to protect against electric shock from 
accessible conductive parts in the event of a failure of the basic insulation.

Summary of Contents for 17681





















Reviews: