background image

5

4. INTRODUCTION

4.1 SCOPE

This hoist is for lifting not pulling.

4.2 SPECIFICATION

Stock No...............................26164............. 26167.............. 26177.............. 26178 ................ 26186
Part No. .............................. CH500B ......... CH1000B .........CH2000B .........CH3000B ........ CH5000B
Load .................................500kgs...........1000kgs .......... 2000kgs .......... 3000kgs .......... 5000kgs
Test load .............................750kgs...........1500kgs .......... 3000kgs .......... 4500kgs .......... 7500kgs
Lift height  ........................... 2.5M .............. 2.5M ............... 2.5M................. 3M .......................3M
Hand force
(when fully loaded N) ...........210................. 330.................. 320.................. 380 ...................... 410
Load chain dia.  ................ 5x15mm ........ 6x18mm.......... 6x18mm.......... 8x24mm........10x30mm
Hook aperature .................. 22mm ............ 26mm ............. 35mm.............. 43mm................37mm
Weight ..................................7kgs...............10kgs .............. 14kgs .............. 24kgs ................ 36kgs

4.3 HANDLING & STORAGE

Take care when handling and lifting. Do not drop the hoist. 
Store in a dry location out of the reach of children.

Summary of Contents for 26164













Reviews: