Draper 59319, Instructions Manual

- 7 -

OPTIONAL ACCESSORIES

KEYCHAIN REMOTE CONTROLS

Get one for every family member! The optional Keychain
Remote Control provides every family member with access to
the sensor alarm.

AC ADAPTOR

To prolong battery life,an optional AC Power Adaptor may be
used to power the alarm.Simply plug it into the AC Adaptor
Socket (see ‘Parts Identification’on Page 2),and feed the cable
through the notch in the bottom of the back cover as the alarm
unit is snapped into place.

When an AC power adaptor is used,continuous power to the
alarm is provided from AC power.We recommend that four AA
batteries be fitted,in addition to the AC Adaptor,as back-up
power supply in the event of mains power failure.Only use a 6V
DC 500mA adaptor with a 3.5mm centre positive male plug.

EXTERNAL SIREN

To boost the output of the alarm,an optional external siren may
be added to the alarm.Simply plug it into the external siren
socket (see parts identification on page 2) and feed the cable
through the notch in the bottom of the back cover as the alarm
unit is snapped into place.

CARE & MAINTENANCE

To keep your alarm looking new, occasionally clean the
unit using a soft cloth slightly dampened with water and
wipe dry. Do not use chemical agents as this may damage
and discolour the unit.

REPLACING THE REMOTE CONTROLS BATTERIES

Operates on 3 x 1.5V LR44/AG13 button cell batteries (included).

1. Remove the screw at the back of the remote control and 

lift from the bottom of the back cover.

2. Place 3 x ‘1.5V LR44/AG13’ alkaline batteries following 

the polarity symbols (+ and -) marked inside the 
battery compartment.

3. Replace the back cover and secure the screw.