- 3 -
POWER SUPPLY
CONNECTING YOUR MACHINE TO THE POWER SUPPLY
The machine should be connected to a 16amp power supply either using the
appropriate blue 16amp plug or directly into the fused mains supply. Both of these
operations should be carried out by a qualified electrician.
*WARNING
A plug with bare flexible wires exposed is hazardous if engaged in a live power socket
outlet.
WARNING THIS APPLIANCE MUST BE EARTHED. (230V ONLY)
The mains lead is coloured Green and Yellow - Earth, Blue - Neutral & Brown - Live. As
these colours may be correspond with the coloured markings identifying the terminals
in you 16amp plug, proceed as follows. The wire which is coloured Green and Yellow
must be connected to the terminal in your plug marked with the letter 'E' or by the earth
symbol or coloured green or green and Yellow. The wire which is coloured blue must
be connected to the terminal which is marked with the letter 'N' or coloured black or
blue. The wire which is coloured brown must be connected to the terminal which is
marked with the letter 'L' or coloured red or brown.
