5
4. INTRODUCTION
4.1 SCOPE
This semi-automatic tyre changer is designed and constructed for mounting and
un-mounting tyres from wheel rims of motor vehicles and motor cycles
.
4.2 SPECIFICATION
Stock no ............................................................................................................................ 81645
Part no ............................................................................................................................. TC100
Rated voltage ................................................................................................................. 230V~
Rated frequency ................................................................................................................ 50Hz
Motor................................................................................................................................ 1.1kW
Phase .................................................................................................................................. 1/3PH
Bead breaker force......................................................................................................... 2100kg
Noise level........................................................................................................................... 70db
Pneumatic supply working pressure ...................................................... 80 – 115psi (6 – 8bar)
Minimum wheel width ...........................................................................................................3"
Maximum wheel width ........................................................................................................14"
Minimum rim diameter (internal locking)...........................................................................13"
Maximum rim diameter (internal locking) ..........................................................................23"
Minimum rim diameter (external locking) ..........................................................................11"
Maximum rim diameter (external locking)..........................................................................21"
Maximum wheel diameter ........................................................................................... 355mm
Overall dimensions .............................................................. 760mmW × 950mmD × 1740mmH
Net weight........................................................................................................................ 180kg
Gross weight..................................................................................................................... 212kg
4.3 HANDLING & STORAGE
To maintain machine and user safety, the responsibility of the owner is to read and follow these
instructions:
• Follow all installation instructions.
• Make sure installation conforms to all applicable local environmental/health and safety rules
and regulations.
• Carefully check the unit for correct initial function.
• Read and follow the safety instructions. Keep them readily available for machine operators.
• Make certain all operators are properly trained, know how to safely and correctly operate the
unit, and are properly supervised.
• Allow unit operation only with all parts in place and operating safely.
• Carefully inspect the unit on a regular basis and perform all maintenance as required.
• Service and maintain the unit only with authorized or approved replacement parts.
• Keep all instructions permanently with the unit and all decals/labels/notices on the unit clean
and visible.
• Do not override safety features.
