Draper 83639, Instructions Manual

5

4. INTRODUCTION

4.1 SCOPE

This machine is designed for use in a domestic environment for light surface preparation and 
other detail work on wood and similar materials.

4.2 SPECIFICATION

Stock no.  ...........................................................................................................................83639
Part no.  ....................................................................................................................... RS230KA
Motor:
 Rated 

voltage 

......................................................................................................  

230V~

Rated frequency  ...................................................................................................  50Hz

Rated input  .........................................................................................................  230W 

Revolutions per minute (no load) .............................................................  12,000min-

1

Backing Pad Size Ø .......................................................................................................  125mm
Abrasive Disc Size Ø ......................................................................................................  125mm
Orbit Diameter ................................................................................................................ 2.7mm
Sound pressure level .................................................................................................  81.3dB(A)
Sound power level  ..................................................................................................   92.3dB(A)
Vibration level .................................................................................................................6.1m/s

2

Weight (machine only)  ...................................................................................................  1.4kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting. 
Dropping this machine will have an effect on the accuracy and may also result in personal 
injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful.  If the air 
is damp, components will rust.  If the machine is unprotected from dust and debris; 
components will become clogged: And if not cleaned and maintained correctly or regularly 
the machine will not perform at its best.