Section 4 -
Attaching Fascia
Section 3 -
Installing Ceiling/Wall Headbox
Please Note:
Installer must provide adequate
clearance for removal of Roller Assembly
during installation and maintenance.
Please Note:
Headbox MUST BE mounted directly
to ceiling or wall, or to a continuous blocking that
has been secured to building structure.
2.
Using pre-drilled holes in endcaps,
mark headbox for drilling.
1.
Position fascia flush
to edge of bracket
and/or butted to
endcap cover.
2.
Snap firmly
into place.
3.
Drill holes in back
(wall mount)
or in top
(ceiling mount)
cover
piece.
4.
Attach endcaps and top/back
cover piece to wall or ceiling,
using mounting hardware
appropriate for site conditions.
1.
Place endcaps into
top/back cover
piece of ceiling/wall
headbox.
Please Note:
Install fascia top to
bottom, with the bottom edge
clicking/snapping into position.
FASCIA
OPERATOR
BRACKET
page 4 of 8
FlexShade
®
2
IDLE
R
BR
ACK
ET A
ND
M
OUN
TING
PLA
TE
BACK
COVER
TOP
COV
ER
BA
CK
C
OV
ER
Figure 7-A
Figure 7-B
Figure 8
