Section 4 -
Installing Side Channels: Preparation
2.
For jamb mounting, remove the Fabric Retainer Strip.
Set aside.
3.
Drill Side Channels at desired mounting points.
1.
Use 1/8"
(3 mm)
Hex Key to remove
Screws from Side Channels and Side
Channel Covers.
Please Note:
Do NOT remove the Bottom
Caps from Side Channels.
Section 3 -
Mounting Headbox in a Recessed Pocket
(Optional)
FlexShade
®
ZIP XL can also be installed in a
pocket in ceiling.
4.
Mark wall or jamb and drill small pilot holes
in mounting surface.
Please Note:
Recommended attachment of Side Channel to structure is
minimum of every 24"
(61cm)
.
B
A
C
DO NOT remove
Neoprene cushions
.
If they come off, reattach with double-sided tape.
SIDE CHANNEL COVER
Jamb Mount
Pilot Hole
Wall Mount
Pilot Hole
Wall Mounting
Jamb Mounting
Wall Mounting
Jamb Mounting
W
ALL
FlexShade
®
ZIP 127
6
"
(159mm)
5"
(127mm)
7
"
(184mm)
5"
(127mm)
min. 6
"
(159mm)
min. 1
(32mm)
FlexShade
®
ZIP XL
page 4 of 11
