Graphic FlexShades
Virtually any logo or image
You provide the artwork, and
Draper
will print your logo or
graphic. We use a high quality, digital four-color process to
assure a crisp and clear image.
• Ideal when restrictions are imposed on signage.
• Put your logo or ad on the side of the shade
facing out, and display it to the world.
• Graphic can be printed on either side of shade.
• See your
Draper
representative for
restrictions and available fabrics.
For more information:
www.draperinc.com/go/ShadeGraphics.htm.
Type D Pocket—
An extruded aluminum pocket for
clean, ceiling flush installation. With bottom closure panel
in place, only a narrow slot is visible. Aluminum pockets
offer a convenient architectural solution for mounting either
Motorized
or
Manual
FlexShades
at the curtain wall.
Installation of
Type
D
in coordination with ceiling finishing
allows for later installation of shades. Pockets are finished in white.
FlexShades
are installed using standard ceiling brackets.
Draper’s Type D Pocket
cross-section dimensions
are
½
deep x
⅝
high. Comes in
lengths. A tile-
support flange along lower edge supports lay-in ceiling.
Pre-welded corners and pocket ends are available. Endcaps
optional. Add ¼
to overall case width if using endcaps.
Hardware for FlexShades
Anchor 2'0" O.C.
Pocket type D
with tile support
by Draper
Curtain
wall
Removable closure
panel D1 by Draper
FlexShade with ceiling
brackets by Draper
4
1
/
2
"
3
1
/
4
"
7
/
8
"
1"
4
5
/
8
"
Graphic FlexShades with Soltis
®
99 fabric at University of Missouri, Columbia.
Architect: Hastings & Chivetta Architects, Inc., St. Louis, MO. Installation:
Jack F. Dale & Associates. Photography: © Emily Bach, Columbia, MO.
Graphic FlexShades with SheerWeave
®
PW3500 fabric at
The Joan Weill Center for Dance (formerly Ailey American
Dance Theater). Architects: Iu + Bibliowicz Architects LLP.
Photography: © 2005 Bruce Katz. All located in New York, NY.
www.draperinc.com
800-989-0126
17
