Draper STORMFORCE 83612 Instructions Manual Download | Manualshive

Page: 5 / 20

background image

5

4. INTRODUCTION

4.1 SCOPE

This hand held power tool is ideal for shaping woodwork, cabinetry, architrave, morticing
and other associated routing work. It is intended for domestic and light commercial use only.
Any other application is considered misuse.

4.2 SPECIFICATION

Stock No. ...........................................................................................................................  83612
Part No.  .....................................................................................................................  PT1202VSF
Rated voltage  ........................................................................................................... 230V~50Hz
Rated input ......................................................................................................................  1200W
Collets  .............................................................................................  6.35mm (

1

⁄

4

") & 8mm (

5

⁄

16

")

Cutter Capacity .................................................................................................................  30mm
Plunge Stroke:
with Dust Extraction  .................................................................................................  0-38mm
without Dust Extraction ............................................................................................  0-50mm
Speed (no load)  ...........................................................................................  10,000-30,000r/min
Sound Pressure Level .................................................................................................  84±3dB(A)
Sound Power Level ....................................................................................................  95±3dB(A)
Vibration Level  ................................................................................................................ 3.6m/s²
Weight .............................................................................................................................  3.63kg

4.3 HANDLING & STORAGE

The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the machine is unprotected from dust and debris;
components will become clogged: And if not cleaned and maintained correctly or regularly
the machine will not perform at its best.

«
...
3
4
5
6
7
...
»

Summary of Contents for STORMFORCE 83612





















Reviews:

No comments

Related manuals for STORMFORCE 83612

Brand: Hagie Pages: 61

Brand: JackJaw Pages: 2

Brand: Labnet Pages: 2

Brand: Panasonic Pages: 180

Brand: Cannon Pages: 40

Brand: NARGESA Pages: 34

Brand: Sota Pages: 7

Brand: Keithley Pages: 57

Brand: Crosley Pages: 6

Brand: Gambro Pages: 273

Brand: endolite Pages: 158

Brand: Lupine Pages: 7

Brand: RAK Pages: 50

Brand: Tuttnauer Pages: 96

Brand: CA.MI Pages: 40

Brand: W&H Pages: 46

PORTASTUDIO 424 MKIII

Brand: Tascam Pages: 48

Brand: Macally Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands