(13) Plug the tr eadmill in and power it up.
NOTE : Do not stand on the treadmill during power up phase.
Reference : Cable-connection depends upon the treadmill model
NEW REDON
HOW TO CHECK OPERATION _
(1) Plug the power cord into an appropriate outlet and turn the treadmill ON.
(2) Once the treadmill has gone through its initial boot up phase, you can run the treadmill belt and
check the belt alignment and tension(see 2-5 Adjustment of belt tension).
(3) Once belt adjustment is complete, you can start testing all functions and features (for more details,
see Page 8 “How to use”). During this testing phase listen for any abnormal noises or vibrations.
(4) If any problems are found during the testing phase, please contact DRAX INC. Customer Support
Center.
(5) During operating the treadmill, check whether abnormal noise/vibration occurred or not.
If abnormal noise/vibration is detected, don’t operate the treadmill.
Contact DRAX INC. Customer Support Center.
(6) Check whether running belt is centered or not between the left/right roller-side. If not, adjust the
belt-centering according to “Adjustment of Belt-Tension” instruction.
6
DRAX Inc.
Address : 26, Jeonpa-ro 62Beon-gil, Manan-gu, Anyang-si, Gyeonggi-do, 14086, KOREA
Tel : +82-31-459-8530 Fax : +82-31-459-8531
E-mail : drax@draxfit.com
