Vigor2110 Series User’s Guide
107
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Interface
Choose a proper interface (WAN, LAN or Any).
For example, the
Direction
setting in
Edit Filter Rule
will ask
you specify IP or IP range for WAN or LAN or any IP address.
If you choose LAN as the
Interface
here, and choose LAN as
the direction setting in
Edit Filter Rule
, then all the IP
addresses specified with LAN interface will be opened for you
to choose in
Edit Filter Rule
page.
Address Type
Determine the address type for the IP address.
Select
Single Address
if this object contains one IP address
only.
Select
Range Address
if this object contains several IPs within
a range.
Select
Subnet Address
if this object contains one subnet for IP
address.
Select
Any Address
if this object contains any IP address.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is selected.
Subnet Mask
Type the subnet mask if the Subnet Address type is selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed above
will be applied later while it is chosen.
Below is an example of IP objects settings.
