Vigor2120 Series User’s Guide
200
allowed.
Interface
Choose a proper interface.
For example, the
Direction
setting in
Edit Filter Rule
will
ask you specify IP or IP range for WAN or LAN/RT/VPN
or any IP address. If you choose LAN/RT/VPN as the
Interface
here, and choose LAN/RT/VPN as the direction
setting in
Edit Filter Rule
, then all the IP addresses
specified with LAN/RT/VPN interface will be opened for
you to choose in
Edit Filter Rule
page.
Address Type
Determine the address type for the IP address.
Select
Single Address
if this object contains one IP address
only.
Select
Range Address
if this object contains several IPs
within a range.
Select
Subnet Address
if this object contains one subnet
for IP address.
Select
Any Address
if this object contains any IP address.
Select
Mac Address
if this object contains Mac address.
MAC Address
Type the MAC address of the network card which will be
controlled.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is
selected.
Subnet Mask
Type the subnet mask if the Subnet Address type is
selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
3.
After finishing all the settings here, please click
OK
to save the configuration. Below is
an example of IP objects settings.
Summary of Contents for Vigor2120 Series
