Draytek Vigor2710 Series User Manual Download

Page: 99 / 335

Vigor2710 Series User’s Guide

Mode

There are several modes provided for you to choose.

Disable

- Turn off the encryption mechanism.

WEP-

Accepts only WEP clients and the encryption key

should be entered in WEP Key.

WPA/PSK-

Accepts only WPA clients and the encryption key

should be entered in PSK.

WPA2/PSK-

Accepts only WPA2 clients and the encryption

key should be entered in PSK.

Mixed (WPA+ WPA2)/PSK -

Accepts WPA and WPA2

clients simultaneously and the encryption key should be
entered in PSK.

WPA

The WPA encrypts each frame transmitted from the radio
using the key. Either

8~63

ASCII characters, such as

012345678(or 64 Hexadecimal digits leading by 0x, such as
"0x321253abcde...").

Type

- Select from Mixed (WPA+WPA2) or WPA2 only.

Pre-Shared Key (PSK)

- Either

8~63

ASCII characters, such

as 012345678 (or 64 Hexadecimal digits leading by 0x, such
as "0x321253abcde...").

WEP

64-Bit

For 64 bits WEP key, either

ASCII characters, such

as 12345 (or 10 hexadecimal digitals leading by 0x, such as
0x4142434445.)

128-Bit

For 128 bits WEP key, either

ASCII characters,

such as ABCDEFGHIJKLM (or 26 hexadecimal digits leading
by 0x, such as 0x4142434445464748494A4B4C4D).

All wireless devices must support the same WEP encryption
bit size and have the same key.

Four keys

can be entered here,

but only one key can be selected at a time. The keys can be
entered in ASCII or Hexadecimal. Check the key you wish to
use.

For additional security of wireless access, the

Access Control

facility allows you to restrict

the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the

Access Control

, a new web page will appear, as depicted below, so that you

could edit the clients' MAC addresses to control their access rights.

Summary of Contents for Vigor2710 Series
















































































































































































































































































































































Search results

Summary of Contents for Vigor2710 Series

Reviews:

Related manuals for Vigor2710 Series

Brands by name

Popular brands

Draytek Vigor2710 Series, User Manual

Search results

Summary of Contents for Vigor2710 Series

Reviews:

Related manuals for Vigor2710 Series

Brands by name

Popular brands