Vigor2820 Series User’s Guide
197
Note:
Such function is available for the wireless station with WPS supported.
It is the simplest way to build connection between wireless network clients and vigor router.
Users do not need to select any encryption mode and type any long encryption passphrase to
setup a wireless client every time. He/she only needs to press the
WPS
button on AP and
selects that AP on the utility of wireless station. Then WPS will connect for client and router
automatically.
There are two methods to do network connection through WPS between AP and Stations:
pressing the
Start PBC
button or using
PIN Code
.
z
On the side of Vigor 2820 series which served as an AP, p
ress
Wireless LAN
ON/OFF/WPS
button for 2 seconds to wait for client device making network
connection through WPS o
r click
Start PBC
on web configuration interface. On the
side of a station with network card installed, press
Start PBC
button of network card.
z
If you want to use PIN code, you have to know the PIN code specified in wireless
client. Then provide the PIN code of the wireless client you wish to connect to the
vigor router.
Summary of Contents for VIGOR2820 series
