2.2
2.2
Vigor286
Vigor286
5ac/Vigor2866ac
5ac/Vigor2866ac
LED
Status
Explanation
ACT
Off
The router is powered off.
Blinking
The router is powered on and running
normally.
WAN2
On
Internet connection is ready.
Off
Internet connection is not ready.
Blinking
The data is transmitting.
QoS
On
The QoS function is active.
Off
The QoS function is inactive.
USB
On
USB device is connected and ready for use.
Off
No USB device is connected.
Blinking
The data is transmitting.
DSL
On
The router is ready to access Internet
through DSL link.
Blinking
Slowly: The DSL connection is ready.
Quickly: The connection is training.
WCF
On
The Web Content Filter is active. (It is
enabled from
Firewall >> General Setup
).
Off
WCF is disabled.
2.4G/5G
On
2.4G/5G: Wireless access point with
bandwidth of 2.4GHz/5GHz is ready.
WLAN: Wireless access point is ready.
Off
Wireless function is disabled.
Blinking
It will blink slowly while wireless traffic goes
through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and
will return to normal condition after two
minutes. (You need to setup WPS within 2
minutes.)
DMZ
On
The DMZ function is enabled.
Off
The DMZ function is disabled.
Blinking
The data is transmitting.
LED on Connector
WAN2
/ P6
Left
LED
On
The port is connected.
Off
The port is disconnected.
Blinking
The data is transmitting.
5
Summary of Contents for Vigor2865ac
Page 2: ...Date April 28 2020 ii ...
