LED
Off
The port is connected with 10/100Mbps.
LAN
P1~P5
Left
LED
On
The port is connected.
Off
The port is disconnected.
Blinking
The data is transmitting.
Right
LED
On
The port is connected with 1000Mbps.
Off
The port is connected with 10/100Mbps
The port “WAN2 / P6” is switchable. It can be used for LAN connection or
WAN connection according to the settings configured in WUI.
Interface
Description
Wireless LAN
ON/OFF/WPS
Wireless band will be switched /changed according to the
button pressed and released. For example,
2.4G (On) and 5G (On) – in default.
2.4G (Off) and 5G (On) – pressed and released the
button once.
2.4G (On) and 5G (Off) – pressed and released the
button twice.
2.4G (Off) and 5G (Off) – pressed and released the
button three times.
When WPS function is enabled by web user interface, press
this button for more than 2 seconds to wait for client’s
device making network connection through WPS.
Factory Reset
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more
than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
USB1~2
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
WAN2 / P6
Connecter for local network devices or modem for
accessing Internet.
LAN P1-P5
Connecters for local network devices.
Phone 1/2
Connecter for analog phone(s).
3
Summary of Contents for Vigor2865ac
Page 2: ...Date April 28 2020 ii ...
