Vigor2910 Series User’s Guide
181
Security
There are three types for security,
Disable
,
WEP
and
Pre-shared key
. The setting you choose here will make the
following WEP or Pre-shared key field valid or not. Choose
one of the types for the router.
WEP
Check this box to use
the same key set in
Security Settings
page. If you did not set any key in
Security Settings
page,
this check box will be dimmed.
Settings
Encryption Mode
- If you checked the box of
Use the same
WEP key …
, you do not need to choose 64-bit or 128-bit as
the Encryption Mode. If you do not check that box, you can
set the WEP key now in this page.
Key Index
- Choose the key that you want to use after
selecting the proper encryption mode.
Key
- Type the content for the key.
Pre-shared Key
Type 8 ~ 63 ASCII characters or 64 hexadecimal digits
leading by “0x”.
Bridge
If you choose Bridge as the connecting mode, please type in
the peer MAC address in these fields.
Six
peer MAC
addresses are allowed to be entered in this page at one time.
Yet please disable the unused link to get better performance.
If you want to invoke the peer MAC address, remember to
check
Enable
box in the front of the MAC address after
typing.
Repeater
If you choose Repeater as the connecting mode, please type in
the peer MAC address in these fields. Two peer MAC
addresses are allowed to be entered in this page at one time.
Similarly, if you want to invoke the peer MAC address,
remember to check
Enable
box in the front of the MAC
address after typing.
Access Point Function
Click
Enable
to make this router serving as an access point;
click
Disable
to cancel this function.
Status
It allows user to send “hello” message to peers. Yet, it is valid
only when the peer also supports this function.
Summary of Contents for Vigor2910 Series
