Vigor2910 Series User’s Guide
81
Address/Range Address/Subnet Address
as the Address Type
and type them in this dialog. In addition, if you want to use the IP
range from defined groups or objects, please choose
Group and
Objects
as the Address Type.
From the
IP Group
drop down list, choose the one that you want
to apply. Or use the
IP Object
drop down list to choose the object
that you want.
Service Type
Click
Edit
to access into the following dialog to choose a suitable
service type.
To set the service type manually, please choose
User defined
as
the Service Type and type them in this dialog. In addition, if you
want to use the service type from defined groups or objects, please
choose
Group and Objects
as the Service Type.
Protocol -
Specify the protocol(s) which this filter rule will apply to.
Source/Destination Port -
(=)
– when the first and last value are the same, it indicates one
port; when the first and last values are different, it indicates a range
for the port and available for this service type.
(!=)
– when the first and last value are the same,
it indicates all
the ports except the port defined here; when the first and
last
values are different, it indicates that all the ports except the range
defined here are available for this service type.
(>)
–
the port number greater than this value is available.
(<)
–
the port number less than this value is available for this
profile.
Summary of Contents for Vigor2910 Series
