Vigor2920 Series User’s Guide
179
Private IP
Specify the private IP address of the internal host providing the
service. If you choose
Range
as the port redirection mode, you
will see two boxes on this field. Type a complete IP address in
the first box (as the starting point) and the fourth digits in the
second box (as the end point).
Private Port
Specify the private port number of the service offered by the
internal host.
After finishing all the settings here, please click
OK
to save the configuration.
Note that the router has its own built-in services (servers) such as Telnet, HTTP and FTP etc.
Since the common port numbers of these services (servers) are all the same, you may need to
reset the router in order to avoid confliction.
For example, the built-in web user interface in the router is with default port 80, which may
conflict with the web server in the local network, http://192.168.1.13:80. Therefore, you need
to
change the router’s http port to
any one other than the default port 80
to avoid conflict,
such as 8080. This can be set in the
System Maintenance >>Management Setup
. You then
will access the admin screen of by suffixing the IP address with 8080, e.g.,
http://192.168.1.1:8080 instead of port 80.
Summary of Contents for Vigor2920 Series
