Vigor3300 Series User’s Guide
48
Network Interface
Display the interface specified for this entry.
Strict Bind
Display the status of Strict Bind.
Edit
Click this button to open the edit page for adjusting the settings.
Delete/Delete All
Click this button to delete the selected setting or all settings. A
confirmation dialog box will appear. Click
OK
to delete this
entry from the Load Balance Policy table. In addition, click
Delete All
in the Load Balance Policy page to delete all of 10
entries on this page.
To edit an entry, select it by clicking the radio button (from 1 to 10). Then click the
Edit
button on the bottom to bring up the following Web page.
Protocol
Select the desired protocol for the selected entry.
Source IP/Subnet Mask
Assign a source IP address and subnet of certain host in LAN
for applying load balance policy.
Dest IP/Subnet Mask
Assign a destination IP address and subnet of certain host in
LAN for applying load balance policy.
Dest Port Range
Assign a destination port number range. The port range is from
1 to 65535. If you choose
All
as the protocol, you don’t need to
type any number here.
Network Interface
Select an interface (WAN1 to WAN4) to be forwarded to.
Strict Bind
Packets fitting the above settings can be routed through the
selected interface only. Check this box to invoke this function.
Summary of Contents for Vigor3300 Series
Page 1: ......
Page 152: ...Vigor3300 Series User s Guide 146 This page is left blank ...
