manualshive.com logo in svg

Draytek Vigor3300V+, User Manual

The Draytek Vigor3300V+ is a powerful network router that offers advanced features. To get started quickly, make sure to download the free Quick Start Manual from our website 88.208.23.73:8080. This comprehensive manual will guide you through the setup process and help you utilize all the functionalities of this outstanding product.

Share
Download
background image

 

Vig Series User’s Guide   

193

Under 

CHT 

mode, call waiting and call transfer function will 

be:  

Call Waiting -

 You can hear waiting tone while a new phone 

call is incoming, then you can do:   
(1) Flash hook: This procedure always holds the current 
connection and connect with the second connection. 
(2) On hook: This procedure disconnects the current 
connection and connects with the new phone call. 

Call transfer 

- Flash hook to initiate another phone call. 

When the new phone call connected, hang up the phone,         
and then the other two sides can communicate. 

ISDN Mode 

Port 1 and Port 3 are fixed in NT mode. Therefore you cannot 
change it.   
Port 2 and Port 4 are switchable between NT and TE mode. 
Port 1 ~ Port 4 are fixed in NT mode if you have installed 
ISDN All TE module in the router. 

MSN numbers 

MSN Numbers mean that the router is able to accept only 
number-matched incoming calls. In addition, local ISDN 
network provider should support MSN services. The router 
provides ten fields for MSN numbers. Note that MSN service 
must be acquired from your local telecom operators.   

1-10 fields 

– Fill in the portion that is different with the own 

number. If the MSN number of ISDN phone matches with the 
configured MSN number, the ISDN phone will uses default 
account which matches with MSN number pre-configured. 

Example:

 

Suppose ISDN phone is connected to Port 5 with MSN 
number set 51. The router uses the default ten MSN number 
from 51 – 59. When a user calls out via ISDN phone, the 
router finds that the MSN number of the ISDN phone matches 
with the first configured MSN number. Then the router will 
use the SIP account set for MSN number 51 for calling out. 

Do Not Disturb 

Reject all of the incoming calls to this port. Click 

Enable

 to 

activate this function. 

Apply

 

When you finish all the configurations, please click this button 
to activate them. 

Summary of Contents for Vigor3300V+







































































































































































































































Reviews:

No comments

Related manuals for Vigor3300V+

ABB i-bus KNX IPR/S 3.5.1 Product Manual preview
i-bus KNX IPR/S 3.5.1
Brand: ABB Pages: 44
D-Link DSL-2640BT Installation Manual preview
DSL-2640BT
Brand: D-Link Pages: 12
NEC Express5800/E120d-M Getting Started preview
Express5800/E120d-M
Brand: NEC Pages: 2
Rain Bird E-3 Installation, Programming & Operation Manual preview
E-3
Brand: Rain Bird Pages: 17
ICP DAS USA PDS-734D Quick Start Manual preview
PDS-734D
Brand: ICP DAS USA Pages: 8
Cisco MERAKI MX450 Installation Manual preview
MX450
Brand: Cisco MERAKI Pages: 4
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Brand: X-Micro Pages: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Brand: Airlink101 Pages: 13
TRENDnet TEW-823DRU Quick Installation Manual preview
TEW-823DRU
Brand: TRENDnet Pages: 10
ADTRAN 1202052L1 User Manual preview
1202052L1
Brand: ADTRAN Pages: 136
Dantel 44118 Installation & Operation Manual preview
44118
Brand: Dantel Pages: 22
Jensen of Scandinavia Air:Link 29150 Installation Manual preview
Air:Link 29150
Brand: Jensen of Scandinavia Pages: 2
Positron TeleLite 720920 Series Manual preview
TeleLite 720920 Series
Brand: Positron Pages: 21
YDI WL2400-ISA Installation & Operation Manual preview
WL2400-ISA
Brand: YDI Pages: 16
Gigabyte GN-WIKG User Manual preview
GN-WIKG
Brand: Gigabyte Pages: 10
Datacom DM4610 Installation Manual preview
DM4610
Brand: Datacom Pages: 45
DataDirect Networks EF2915 Series User Manual preview
EF2915 Series
Brand: DataDirect Networks Pages: 97
HeimVision HM243 User Manual preview
HM243
Brand: HeimVision Pages: 167

Brands by name

Popular brands

Load more brands