Vigor3900 Series User’s Guide
93
Cancel
Click it to exit the dialog without saving the configuration.
If you choose Link-Local as IPv6 protocol type
Link-Local address is used for communicating with neighbouring nodes on the same
link. It is defined by the address prefix
fe80::/64
. You don't need to setup Link-Local
address manually for it is generated automatically according to your MAC Address.
If you choose PPP as IPv6 protocol type
Simply refer to the section of “
If you choose PPPoE as IPv4 protocol type, click the
PPPoE Tab to open the following page”
for detailed information.
If you choose Static as IPv6 protocol type, click the StaticV6 tab to open the
following page:
Available parameters are listed as follows:
Item Description
IPv6 Address
Type the IP address for such protocol.
IPv6 Prefix Length
Type your IPv6 address prefix length.
IPv6 Gateway
Address
Type your IPv6 gateway address.
IPv6 DNS Server
Address
Type your IPv6 primary DNS Server address.
Add
– click this button to have a field for adding a new IP
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
