Vigor3900 Series User’s Guide
156
Each type will bring different settings for configuration.
When Subnet is selected as Source Type
IP Address
- Type an IP address here as the
source IP address for such rule.
Subnet Mask
- Use the drop down list on the right
to choose a suitable mask for the source.
When Object is selected as Source Type
IP Object –
Use the drop down list to choose the
source IP object(s) for such rule profile.
IP Group –
Use the drop down list to choose the
source IP group(s) for such rule profile.
Destination Type
- Choose the address type (Any, Subnet,
Object or Country) for such rule.
Each type will bring different settings for configuration.
When Subnet is selected as Destination Type
IP Address
- Type an IP address here as the
destination IP address for such rule.
Subnet Mask
- Use the drop down list on the right
to choose a suitable mask for the destination.
When Object is selected as Destination Type
IP Object –
Use the drop down list to choose the
destination IP object(s) for such rule profile.
IP Group –
Use the drop down list to choose the
destination IP group(s) for such rule profile.
DNS Object -
Use the drop down list to choose
DNS object(s) for such rule profile.
When Country is selected as Destination Type
Destination
Country Object -
Use the drop down list to
choose the country object(s) for such rule profile.
Route Rule
Out-going Rule
- It determines the way (interface) that the
incoming traffic will be forwarded to.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
