Vigor3900 Series User’s Guide
300
Bind Type
There are three types of bind type supported.
Simple
Mode
– Just simply do the bind authentication
without any search action.
Anonymous
– Perform a search action first with
Anonymous account then do the bind authentication.
Regular
Mode
– Mostly it is the same with anonymous
mode. The different is that, the server will firstly check if
you have the search authority.
For the regular mode, you’ll need to type in the
Regular
DN
and
Regular Password
.
Server IP Address
Enter the IP address of LDAP server.
Port
Type a port number as the destination port for LDAP server.
Common Name
Identifier
Type or edit the common name identifier for the LDAP
server. The common name identifier for most LDAP server
is “cn”
Base DN
It means “
Base Distinguished Name
”. Type the
distinguished name used to look up entries on the LDAP
server.
Group DN
It means “
Group Distinguished Name
”. Type the
distinguished name used to look up entries on the LDAP
server.
Regular DN
Type this setting if
Regular
Mode
is selected as
Bind
Type.
Regular Password
Specify a password if
Regular
Mode
is selected as
Bind
Type.
Logout After(min)
It means the maximum usage duration for RADIUS
authentication.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the configuration.
4.
Enter all the settings and click
Apply
.
5.
A new LADP/Active Directory Profile has been created.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
