Vigor3900 Series User’s Guide
330
If you choose
IPSec
as the Type, you will get the following screen:
Available parameters are listed as follows:
Item Description
Profile
Display the name of the VPN profile.
Enable
Check this box to enable such profile.
Auto Dial-Out
Click Enable to enable the function of auto dial-out.
Auto Dial-Out Backup
– Specify the condition from the
drop down list to activate backup dial-out.
WAN Profile
Choose a WAN profile to be used by such profile.
Local IP/Subnet
Mask
Type the IP address and subnet mask of local host.
Local Next Hop
Specify the gateway for WAN interface. Usually, use the
default setting (leave it in blank).
Remote Host
Type the WAN IP address for the remote host.
Remote IP / Subnet
Mask
Type the LAN IP address and LAN subnet mask for the
remote host.
More Remote
Subnet
Add more remote subnet in this field if required.
IKE Phase 1
The ultimate outcome is to exchange security proposals to
create a protected secure channel.
Main
mode is more
secure than
Aggressive
mode since more exchanges are
done in a secure channel to set up the IPSec session.
However, the
Aggressive
mode is faster. The default value
in Vigor router is Main mode.
Local ID
– Type the ID for Vigor router which can be
configured by the remote end. It is available only when
Aggressive Mode is enabled.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
