Vigor3900 Series User’s Guide
392
Profile
– type a new name for such IP object.
Address Type
–Choose the address type (
Single
or
Range
) for such rule. Each type will bring different
settings for configuration.
Start IP Address
- Type the IP address of the starting
point for such profile.
End IP Address
- Type the IP address of the ending
point for such profile if you choose
Range
as
Address
Type
.
Subnet Mask
– Choose the subnet mask from the drop
down list if you choose
Subnet
as
Address Type
.
Remote Address
Click
on the left side of the
Remote IP Object/ Remote
IP Group
profile. Check the object profile(s) as the
destination target.
Remote IP Object –
Use the drop down list to choose one
of the destination IP objects for such rule profile.
Remote IP Group –
Use the drop down list to choose one
of the destination IP group for such rule profile.
If you want to create a new IP object, simply click
to
open the following dialog.
Profile
– Type a new name for such IP object.
Address Type
– Choose the address type (Single or
Range) for such rule. Each type will bring different
settings for configuration.
Start IP Address
- Type the IP address of the starting
point for such profile.
End IP Address
- Type the IP address of the ending
point for such profile if you choose
Range
as
Address
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
