Draytek Vigor3900 Series User Manual Download

Page: 457 / 516

Vigor3900 Series User’s Guide

449

Click

Diagnostics

and click

Traffic Graph

to pen the web page. Choose the

Setup

tab to

specify LAN and WAN profiles to display corresponding graphs for CPU, Memory, LAN,
WAN configurations and session. Click

Refresh

to renew the graph at any time.

Each item will be explained as follows:

Item Description

Setup

In this page, simply specify which LAN profile and WAN
profile will be applied. The traffic graph will be drawn
based on the profiles selected.

Enable

– Check this box to enable such profile.

LAN

– Use the drop down menu to choose a LAN profile.

WAN

–Use the drop down menu to choose a WAN profile.

Apply

- Click it to save the configuration configured under

the Setup tab.

CPU

Click the CPU tab.

There are three selections provided for you to specify.

Recent 24 Hours

– Display the information of CPU

operation about recent 24 hours.

Recent 7 Days

– Display the information of CPU operation

about recent 7 days.

Recent 4 Weeks

– Display the information of CPU

operation about recent 4 weeks.

Memory

Click the Memory tab.

There are three selections provided for you to specify.

Recent 24 Hours

– Display the information of memory

operation about recent 24 hours.

Recent 7 Days

– Display the information of memory

operation about recent 7 days.

Recent 4 Weeks

– Display the information of memory

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299

Summary of Contents for Vigor3900 Series





































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vigor3900 Series

Reviews:

Related manuals for Vigor3900 Series

Brands by name

Popular brands

Draytek Vigor3900 Series, User Manual

Search results

Summary of Contents for Vigor3900 Series

Reviews:

Related manuals for Vigor3900 Series

Brands by name

Popular brands