Vigor3900 Series User’s Guide
87
Cancel
Click it to exit the dialog without saving the configuration.
If you choose DHCP as IPv4 protocol type, click the DHCP Tab to open the
following page:
Available parameters are listed as follows:
Item Description
Host Name
(Optional)
Type a name as the host name for identification.
IP Alias
Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you
can see and choose it in later web page settings (e.g.,
NAT>>Port Redirection/DMZ Host)
.
Add
– To add a new IP address, click
Add.
Type the IP
address and use the drop down list to specify the subnet
mask. Next, click
Save
. The new one will be added and
displayed on the field under the box.
Save –
click this button to save the setting.
– click the icon to remove the selected entry.
MTU/MRU
It means Max Transmit Unit for packet. The default setting
is 1500.
Connection
Detection Mode
Select a detecting mode for this WAN interface. There are
three ways
ARP
,
PING
and
HTTP
supported in Vigor
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
