VigorAP 810 User’s Guide
95
transmission, please choose
WEP
.
WEP Keys
- Four keys
can be entered here, but only one key
can be selected at a time. The format of WEP Key is restricted
to 5 ASCII characters or 10 hexadecimal values in 64-bit
encryption level, or restricted to 13 ASCII characters or 26
hexadecimal values in 128-bit encryption level. The allowed
content is the ASCII characters from 33(!) to 126(~) except '#'
and ','.
Encryption Type for
WPA/PSK and
WPA2/PSK
This option is available when WPA/PSK or WPA2/PSK is
selected as
Security Mode
.
Select
TKIP
or
AES
as the algorithm for WPA.
Pass Phrase
Either
8~63
ASCII characters, such as 012345678 (or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
Connection Type
Choose DHCP or Static IP as the connection mode.
DHCP
– The wireless station will be assigned with an IP from
Vigor router.
Static IP
– The wireless station shall specify a static IP for
connecting to Internet via Vigor router.
Router Name
Type a name for the router as identification. Simply use the
default name.
IP Address
This setting is available when
Static IP
is selected as
Connection Type
.
Type an IP address with the same network segment of the LAN
IP setting of the router. Such IP shall be different with any IP
address in LAN.
Subnet Mask
This setting is available when
Static IP
is selected as
Connection Type
.
Type the subnet mask setting which shall be the same as the
one configured in LAN for the router.
Default Gateway
This setting is available when
Static IP
is selected as
Summary of Contents for VigorAP 810
