VigorAP 910C User’s Guide
41
wireless bridge.
Universal Repeater
This product can act as a wireless range extender that will help
you to extend the networking wirelessly. The access point can
act as Station and AP at the same time. It can use Station
function to connect to a Root AP and use AP function to service
all wireless clients within its coverage.
Note:
The
Wireless LAN
settings will be changed according to the
Operation Mode
selected here. For the detailed information, please refer to the section of
Wireless LAN
.
3
3
.
.
2
2
L
L
A
A
N
N
Local Area Network (LAN) is a group of subnets regulated and ruled by modem.
Click
LAN
to open the LAN settings page and choose
General Setup
.
Note:
Such page will be changed according to the
Operation Mode
selected. The
following screen is obtained by choosing
AP
as the operation mode.
Available settings are explained as follows:
Item Description
LAN IP Network
Configuration
Enable DHCP Client
– When it is enabled, VigorAP 910C will
be treated as a client and can be managed / controlled by AP
Management server offered by Vigor router (e.g., Vigor2860).
IP Address
– Type in private IP address for connecting to a local
private network (Default: 192.168.1.2).
Subnet Mask
– Type in an address code that determines the size
