VigorBX 2000 Series User’s Guide
101
Available settings are explained as follows:
Item Description
Multi-PVC/VLAN Channel
5/6/7
Enable –
Click it to enable the configuration of this channel.
Disable –
Click it to disable the configuration of this channel.
WAN Type
The connections and interfaces created in every channel may
select a specific WAN type to be built upon. In the Multi-PVC
application, only the Ethernet WAN type is available. The
user will be able to select the physical WAN interface the
channel shall use here.
General Settings
VPI
- Type in the value provided by your ISP.
VCI
- Type in the value provided by your ISP.
Protocol
- Select a proper protocol for this channel.
Encapsulation
- Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header –
Check the box to enable the following
two options.
VLAN Tag –
Type the value as the VLAN ID number. Valid
settings are in the range from 1 to 4095. The network traffic
flowing on each channel will be identified by the system via
their VLAN Tags. Channels using the same WAN type may not
configure the same VLAN tag value.
Priority –
Choose the number to determine the packet
priority for such VLAN. The range is from 0 to 7.
ATM OoS
QoS Type
- Select a proper QoS type for the channel.
Type the values for PCR, SCR and MBS respectively.
Open Port-based Bridge
Connection for this
Channel
The settings here will create a bridge between the LAN ports
selected and the WAN. The WAN interface of the bridge
connection will be built upon the WAN type selected using
the VLAN tag configured.
Physical Members –
Group the physical ports by checking the
corresponding check box(es) for applying the port-based
bridge connection.
Open WAN Interface for
this Channel
Check the box to enable relating function.
WAN Application –
Management
– It can be specified for general
management (Web configuration/telnet/TR069). If you
choose Management, the configuration for this VLAN will
be effective for Web configuration/telnet/TR069.
IPTV
- The IPTV configuration will allow the WAN
interface to send IGMP packets to IPTV servers.
WAN Setup
It is available only when
VDSL
or
Ethernet (WAN2)
is
selected as
WAN Type
. Choose
PPPoE/PPPoA Client
or
Static or Dynamic IP
as the WAN mode for such channel.
If PPPoE/PPPoA Client
is selected as
WAN Setup,
you
Summary of Contents for VigorBX 2000 Series
