VigorIPPBX 3510 Series User’s Guide
220
Allowed Dial-In Type
Determine the dial-in connection with different types.
PPTP
Allow the remote dial-in user to make a PPTP VPN
connection through the Internet. You should set the User
Name and Password of remote dial-in user below.
IPSec Tunnel
Allow the remote dial-in user to trigger an IPSec VPN
connection through Internet.
L2TP
Allow the remote dial-in user to make a L2TP VPN
connection through the Internet. You can select to use L2TP
alone or with IPSec. Select from below:
None -
Do not apply the IPSec policy. Accordingly, the VPN
connection employed the L2TP without IPSec policy can be
viewed as one pure L2TP connection.
Nice to Have
- Apply the IPSec policy first, if it is applicable
during negotiation. Otherwise, the dial-in VPN connection
becomes one pure L2TP connection.
Must -
Specify the IPSec policy to be definitely applied on
the L2TP connection.
Specify CLID or Remote
VPN Gateway
You can specify the IP address of the remote dial-in user or
peer ID (should be the same with the ID setting in dial-in
type) by checking the box. Enter Peer ISDN number if you
select ISDN above. Also, you should further specify the
corresponding security methods on the right side.
If you uncheck the checkbox
,
the connection type you select
above will apply the authentication methods and security
methods in the general settings.
User Name
This field is applicable when you select PPTP or L2TP with or
without IPSec policy above.
Summary of Contents for VigorIPPBX 3510 Series
