VigorPro5300 Series User’s Guide
137
To check if SSL Web Proxy is activated or not, please open
Draytek SSL VPN portal interface. From the web page, you
will see the message to indicate that you have the privilege for
the SSL Web Proxy.
Set SSL Web Proxy
– If you haven’t set any SSL VPN web
proxy profiles, you will a link here. Click this link to access
into the configuration page of SSL VPN.
Note:
SSL VPN can be applied in browser (e.g., IE)
which supports ActivateX only.
User Name
This field is applicable when you select ISDN, PPTP or L2TP
with or without IPSec policy above.
Password
This field is applicable when you select ISDN, PPTP or L2TP
with or without IPSec policy above.
IKE Authentication Method
This group of fields is applicable for IPSec Tunnels and L2TP
with IPSec Policy when you specify the IP address of the
remote node. The only exception is Digital Signature (X.509)
can be set when you select IPSec tunnel either with or without
specify the IP address of the remote node.
Pre-Shared Key -
Check the box of Pre-Shared Key to
invoke this function and type in the required characters (1-63)
as the pre-shared key.
Digital Signature (X.509) –
Check the box of Digital
Signature to invoke this function and Select one predefined
Profiles set in the
VPN and
Remote Access >>IPSec Peer
Identity.
IPSec Security Method
This group of fields is a must for IPSec Tunnels and L2TP
with IPSec Policy when you specify the remote node. Check
the Medium, DES, 3DES or AES box as the security method.
Summary of Contents for VigorPro 5300
