background image

Setting MON - FRI 

1. 

Press 

set?

 until SET and PROG? are shown in the

display. 

2. 

Press 

OK

 to enter program. 

3. 

Press 

OK

 to select MON-FRI.

4. 

Press + or - to change the ON time. 

5. 

Press 

set?

 to set the ON time and select the  

OFF time. 

6. 

Press + or - to change the OFF time.

7. 

Press

 set?

 to set the OFF time and select the next

ON time. 

 

NOTE:

 

Speed up the display by holding down the 

+

 or 

-

 

buttons.

PROG?

PROG?

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

PROG

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

6:30

PROG

MON TUE WED THU FRI

6:30

PROG

OFF

HW

HW ON

MON TUE WED THU FRI

8:30

6:30

PROG?

PROG?

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

PROG

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

6:30

PROG

MON TUE WED THU FRI

6:30

PROG

OFF

HW

HW ON

MON TUE WED THU FRI

8:30

6:30

PROG?

PROG?

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

PROG

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

6:30

PROG

MON TUE WED THU FRI

6:30

PROG

OFF

HW

HW ON

MON TUE WED THU FRI

8:30

6:30

PROG?

PROG?

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

PROG

MON TUE WED THU FRI

PROG?

MON TUE WED THU FRI

6:30

PROG

MON TUE WED THU FRI

6:30

PROG

OFF

HW

HW ON

MON TUE WED THU FRI

8:30

6:30

User Guide 

LP10RF Programmer & Receiver

Changing the Program

Repeat operations 4 to 7 to set the second and third ON/

OFF times. 

 

NOTE:

   

After pressing 

set?

 for the third hot water pre-heat 

OFF time the display shows SET MON

Setting individual weekdays: 

 

NOTE:

 

If you do not require individual weekday times, 

then press 

set?

 until SET SAT-SUN are displayed 

and continue on the next page. If you do not wish 

to change the setting for the day displayed, then 

press 

set?

 until the first day you want to change is 

displayed. 

1. 

Press OK to select weekday.

2. 

Press OK to select first ON time.

3. 

Press + or - to change the ON time.

4. 

Press 

set?

 to set the ON time and select the OFF 

time. 

5. 

Press + or - to change the OFF time.

6. 

Press 

set?

 to set the OFF time and select the next

ON time.

Repeat operations 3 to 6 to set the second and third ON/

OFF times. 

 

NOTE:

 

Speed up the display by holding down the 

+

 or 

-

 

buttons. 

PROG?

PROG?

MON

MON

MON

MON

MON

MON 

TUE WED THU FRI

PROG

PROG?

6:30

PROG

6:30

PROG

OFF

HW

HW ON

8:30

6:30

PROG?

PROG?

MON

MON

MON

MON

MON

MON 

TUE WED THU FRI

PROG

PROG?

6:30

PROG

6:30

PROG

OFF

HW

HW ON

8:30

6:30

PROG?

PROG?

MON

MON

MON

MON

MON

MON 

TUE WED THU FRI

PROG

PROG?

6:30

PROG

6:30

PROG

OFF

HW

HW ON

8:30

6:30

 

NOTE:

 

After pressing 

set?

 for the third OFF time, SET and 

the next weekday are displayed after completing the 

steps above for FRI the display shows SET SAT-SUN. 

see next page....

22

Installation & User Guide

06

51

5086

0

0

1 I

SS

C

Summary of Contents for DIGISTAT+2RF





























Reviews: