-
16
-
2.6
SPARE PARTS
-
magnesium anode
-
contact thermometer
When ordering spare parts always state the name of the part, the type and type number from the tank's
plate.
3
IMPORTANT NOTICES
3.1
IMPORTANT NOTICES
Without a proof issued by a professional company about performed electrical and plumbing
fixture the warranty shall be void.
Protective magnesium anode must be checked regularly and replaced, if necessary.
No closing armature may be mounted between the tank and the safety valve.
All outlets of hot water must be equipped with combination faucets.
Prior to the first
filling the tank with water we recommend that the receptacle's flange
connection nuts are tightened.
3.2
INSTALLATION REGULATIONS
Both the electric and water installation must follow and meet the requirements
and regulations relevant in the country of use!
3.3
DISPOSA
L OF PACKAGING MATER
IAL AND NON-
FUNCTIONING PRODUCT
A service fee for providing return and recovery of packaging material has been
paid for the packaging in which the product was delivered.
The service fee was
paid pursuant to Act No 477/2001 Coll., as amended, at EKO
-
KOM a.s. The client
number of the company is F06020274.
Take the water tank packages to a waste
disposal place determined by the municipality.
When the operation terminates,
disassemble and transport the discarded and unserviceable heater to a waste
recycling centre (collecting yard), or contact the manufacturer.
22
-
11
-
2017
