9
NON MILK-CONTACT PARTS:
The following parts do not come in contact milk and should only be cleaned as needed.
Membrane Cap
Tubing
Special Cleaning Instructions for Tubing:
1. Tubing does not come in contact with milk and should only be washed if dirty or condensation is present.
2. If condensation is from a previous washing process, there is no need to wash again.
3. Wash with warm soapy water and rinse clean with clear water.
4. Allow water to drain from tubing completely after washing.
5. Shake out any remaining water droplets and hang to dry.
6. Do not use tubes until completely dry.*
*A small amount of condensation is allowable; however, a tube with water droplets may damage the pump motor.
Cleaning
Silicone stretch wall may be removed for cleaning, as necessary. Silicone stretch wall may simply be wiped
clean with a damp cloth but is also dishwasher and sterilizer safe.
DO NOT SUBMERGE THE
PUMP MOTOR IN WATER!
WIPE CLEAN WITH
DAMP CLOTH ONLY.
