5
7. Select the volume in the vessel. Use the UP or DOWN Arrow button to adjust between
2oz (60ml) and 11oz (325ml).
8. Select the start temperature condition of the vessel. Each button press toggles the 3 options.
Room Temperature
Refrigerator Frozen
Manual Time Adjustment: While in the temperature condition mode, use the UP and DOWN
buttons to change the timer setting. NOTE: The last used warming time is remembered for
your next use.
9. Press the "Cycle Start" button. The timer will count down until warming is finished.
Volume Amount
Units
Start Condition
Timer Display
CLEANING THE WARMER
Daily
1. Allow unit to cool before cleaning.
2. Remove the top warming chamber from the base.
3. Empty the water from the base.
4. Rinse the reservoir, warming chamber and components with clean water. If storing unit for
longer than a day, dry or allow to air dry before re-assembly. DO NOT SUBMERGE BASE IN WATER.
Special Cleaning
If the unit warming chamber and/or warmer base becomes contaminated with milk: Hand wash
with clean water and mild detergent.
If buildup occurs on the heating element surface, follow this descale procedure:
1. Mix 175 ml (5 oz) of distilled water with 45 ml (2 oz) white vinegar.
2. Fill lower reservoir with the water/vinegar mix.
3. Run an 8 minute warming cycle.
4. Allow to cool, disassemble and rinse warmer base, warming chamber and components with
clean water.
DO NOT SUBMERGE BASE IN WATER.
Using tap water may shorten the life of the unit. We recommend Distilled Water for
best performance.
