PRE-FLIGHT CHECK
1.
Ensure transmitter and receiver batteries are fully charged.
2.
Check balance of glider and control surface deflections one last time. Make adjustments if necessary. It is
always important to do this check before each flight session if possible.
3.
Turn on transmitter, then glider.
4.
Refer to table and graphic below to verify proper
control surface movements. Hold glider with nose
facing away from you and verify that control stick
inputs result in correct control surface movements.
5.
Check for any binding or interference between
moving parts and do a range test according to
your transmitter’s instructions. You are now ready for the maiden flight!
Roll
Roll Right:
Right elevon up, Left elevon down
Roll Left:
Left elevon up, Right elevon down
Pitch
Nose Up:
Elevons both deflected up
Nose Down:
Elevons both deflected down
15.
