2.0 INSTALLATION GUIDELINES
R699800 - Inti Series User Manual
13
and down position and configure trapezoidal correction.
This unit comes with a optical shift that features vertical and horizontal adjustment of the projection screen position.
Adjust the picture to your screen.
•
The Vertical Shift level is between -80% and 80% of the Screen Height (0.80 x H).
•
The Horizontal Shift level is between -34% and 34% of the Screen Base (0.34 x B).
•
The shift level is set to 0% vertically and horizontally by default, that means that the optical lens is aligned with
the center of the screen.
•
If the projector is not installed vertically, use trapezoidal Correction to fulfill your screen.
•
If you plan to use both the vertical and horizontal shifts, make sure to not exceed the values contained in the tab
below:
2.8.0.1
Adjust the picture position
The Inti Series projector has motorized vertical and horizontal shifts. Browse into the Menu to the [Lens Control]
setting into the [Installation] menu, select the shift adjustment. Or use the direct access button on the Remote
Control Unit [Lens Control] to make the lens control adjustment.
You can use self-generated test pattern of the projector or an external pattern, from a calibration DVD by example,
This unit comes with a vertical and horizontal shift to suit most installations. Make sure that your installation
does not exceed 80% vertical offset and 34% horizontal offset to avoid trapezoidal correction.
Left - Right shift
0%
5%
10%
15%
20%
25%
30%
34%
max. Up - Down shift
80%
74%
66%
57%
47%
34%
18%
0%
Screen Height
(H)
Screen Base (B)
Horizontal Shift +/- 34%
Vertical Shift
+/- 80%
Summary of Contents for Inti R699800 series
Page 1: ......
Page 54: ...9 0 MISCELLANEOUS 54 R699800 Inti Series User Manual ...
Page 55: ......
Page 56: ......
