PCM64 PC card User’s guide
9
Chapter 2
INSTALLATION
System Requirements
•
Notebook with 486 or above
•
Free PC card slot (PCMCIA type 2)
•
WINDOWS 95
•
PCM64 card
•
3M byte disk space for installation
WIN95 Hardware Installation
•
Plug the PCM64 card into an unused PC card slot
•
WIN95 finds new hardware « DREAM PC Card Sound Studio »
•
WIN95 asks for drivers to install
•
Select « Driver from disk provided by hardware manufacturer »
•
Insert diskette N°1
•
Follow WIN95 installation procedure.
•
Now your hardware is installed
•
From "start / settings /control panel / system / device manager / sound, video & game controllers",
check that your card is correctly installed.
It should appears as «PC Card Sound Studio »
•
To define the PCM64 Wave table as default MIDI device:
From « start / settings /control panel / multimedia / midi »:
select « PC Card Sound Studio »
•
To define the PCM64 Wave as default wave device:
From « start / settings /control panel / multimedia / wave »:
select « DREAM 9407, wave Nb1 » as playback
select « DREAM 9407, wave record » as recording
check « show volume control on the taskbar »
•
Now your hardware is checked & configured
Hot Plug feature
The PCM64 can be inserted or removed while the notebook is running. However, following cautions
apply :
•
Close all applications using sound before removing the PCM64
•
When you insert the PCM64, there is some delay because firmware and soundbank are downloaded
to the card.